It’s important to measure the voltage of your fence and fence energiser to ensure your electric fence is working properly, keeping your horses safe. Our ElectroBraid® digital electric fence tester measures voltage on ElectroBraid® as well as any metal wire, poly wire/rope or poly tape.
Accurate 3-digit readout from 500 to 9,900 volts (0.5 to 19.9 KV)
Easy-to-carry pocket size
Automatic on/off prolongs battery life
Rugged, heavy-duty ABS plastic case
9-volt battery operation (battery included)
Simple, one-touch operation
The ElectroBraid® digital electric fence tester combines digital accuracy with ease and convenience. With the touch of a button, the tester provides you with accurate and reliable voltage readings of your fence line or fence energiser.
Why is it important to check my fence regularly?
The safety of your horses is at stake, so don’t wait for something to go wrong to test your fence. Check the voltage on your fence regularly using our ElectroBraid® Digital Electric Fence Tester. It allows you track down and correct any electrical shorts. Since posts can move due to frost heave or impacts, be also be sure to check the tension on the Braid™ on a regular basis to ensure each strand is tight. Reset posts and re-tighten each strand for proper operation.
Are there any indicators that my fence is not working properly?
If you find your horses are showing less respect for the fence than normal, it is likely something is reducing the voltage on your fence, or the grounding of the fence is not what it should be.
What can I do to ensure there’s adequate voltage on my fence line?
Keep insulators free of dirt, dust and cobwebs
Keep the fence line clear of weeds
Walk the fence frequently, especially after storms, to check for fallen branches or debris
Check the tension of the Braid™ to make sure each strand is tight. If posts moved due to frost heave or impact, this can affect the tension on the strands.
Ensure that all electrical connections remain secure
Make sure ground rod clamps are secure and connector wire is intact
Since posts can move due to frost heave or impacts, also be sure to check the tension on the Braid™ on a regular basis to ensure each strand is tight. Reset posts and re-tighten each strand for proper operation.
How do I test my fence?
These simple tests will assure you that your ElectroBraid® fence is properly installed and working as designed. Using an ElectroBraid® digital electric fence tester is simple.
Test the fence strands at the location furthest away from the fence ground system*
When you are at the point of your fence which is most distant from your ground system, you should first read the voltage between the grounded line and each of the other electrified fence lines to confirm that the fence is wired properly with no electrical shorts.
Most importantly, check the voltage between each electrified fence line and the soil under the fence. To do this, place the ground probe on the tester about one and a half inches into the soil and test the actual voltage of each positive line. If less than 5,000 (5.0) volts, you have a problem with your ground system.
Finally, check the voltage to the soil at any high points or dry areas to make sure you are getting at least 5,000 (5.0) volts. If less than 5,000 (5.0) volts, you will need to install additional ground rods.
REMEMBER: ALL READINGS SHOULD BE OVER 5,000 (5.0) VOLTS. If any reading is less than 5,000 (5.0) volts, you need to troubleshoot and fix the problem.
How to test the fence charger/energiser
Turn your fence charger/energiser OFF
Disconnect the two lead out wires from your fence charger
Turn the fence energiser ON. To test the voltage on your charger, simply apply the tester to the (+) terminal and the ground probe on the tester to the (-) terminal of the energiser. If less than 5,000 (5.0) volts, there is a problem with the energiser.
If the energiser is OK., turn it OFF before you reconnect the two lead out wires to the energiser, then turn the energiser back ON.
Next, test the voltage of fence strands near the charger/energiser. Apply the ground probe on the tester to the grounded line and apply the tester to each of the other electrified Positive lines, one after the other. You should read at least 5,000 (5.0) volts on each electrified line. If less than 5,000 (5.0) volts, there is a problem with the lead-out wire or you have crossed wires during installation.
How to test the earth return system
Turn your fence charger/energiser OFF
90 or 120 meters (300 or 400 feet) from the fence charger/energiser, create a short circuit of the current in the fence by laying two or three steel stakes or lengths of pipe against the lowest, hot line of the fence, preferably where the ground is damp. DO NOT ALLOW CONTACT WITH THE GROUNDED LINE OF BRAID – it is important that the electrical current flow freely from the electrified fence lines into the earth return system
Turn the fence energiser ON.
Using your ElectroBraid® digital electric fence tester, apply the probe to one of your ground rods. Apply the ground pin to a small steel stake (such as a screwdriver) placed in the ground at least 3 feet from any ground rod.
The reading on the voltmeter should be 0.3 k volts (300 volts) or less. If it is greater than 300 volts, the ground system is inadequate. You may need more ground rods.
When is the best time to test my fence
Be sure to monitor your fence on a regular schedule using your ElectroBraid® digital electric fence tester.
To check for electrical shorts, test after rain when conditions are wet because shorts are more easily detected in wet conditions.
TIP: Listen for crackling sounds or look for arcing at night to locate any shorts in your fence.
To confirm you have adequate earthing, test when conditions are very dry. In particular, test where the fence runs over high terrain or through areas that might be especially dry.
Accurate Three Digit Read Out from .5 to 19.9 KV
Measure fence line and fence energiser voltage
Accurate and reliable voltage readings of your fence line or fence energiser with simple, one-touch operation
Measures voltage on any metal wire, poly wire/rope or poly tape
Combines digital accuracy with ease and convenience
Rugged easy-to-carry pocket-size case made of heavy duty ABS plastic